Sleep Apnea at Home test Instructions

Step-by-step guide to using your medical device

Basic Instructions

Step 1

Unboxing the Device ▼
Unboxing the Device
  1. Carefully open the box and remove all items.
  2. Ensure you have everything listed in the user manual:
    • Battery Pack
    • Mask to be worn
    • Nasal Cannula

Step 2

Assembling the Device ▼
Assembling the Device

Connect the Device to the Battery Pack as shown in the video above.

Step 3

Starting the Recording ▼
Buzzers Sounds Buzzers and Buttons

Once Plugged in:

  1. Press any of the four buttons on the mask to start recording. A buzzer sound will play to confirm it started.
  2. The device will record sleep data for the next few hours.
  3. To stop the recording, press the same button again. A different buzzer sound will confirm it has stopped.
  4. You can also stop by unplugging the device.

Step 4

Final Setup ▼
Final Setup

1. Now, you are ready to wear the device.

2. Press the button to start recording, and enjoy a restful sleep!

Happy recording! Sleep well!

Additional Instructions (Data Visualization)

Step 5

Connecting to the Device ▼
Wi-Fi Hotspot for the Device

To connect your phone to the device's Wi-Fi network:

  1. Open your phone’s Wi-Fi settings.
  2. Look for a network named ESP8266_HOTSPOT.
  3. Enter the password: 12345678.
  4. Connect to this network.

Step 6

Real-time Sensor Data ▼
Real-time Sensor Data 1 Real-time Sensor Data 2

Once connected:

  1. Open a browser and go to 192.168.1.100/readings .
  2. You'll see real-time sensor data updating every few seconds.

Optional Instructions (Wi-Fi Setup)

Step 7

Access the Setup Page ▼
Router Setup

To connect your device to Wi-Fi:

  1. Open a browser and go to 192.168.1.100 .
  2. Enter your home Wi-Fi SSID and password in the fields provided.

Step 8

Wi-Fi Connection Confirmation ▼
Wi-Fi Connected

If the Wi-Fi credentials are correct:

  1. The device will connect automatically.
  2. You’ll see a confirmation message indicating successful connection.

Reconnection Screen

If incorrect credentials were entered:

  1. You’ll be prompted to re-enter the Wi-Fi details.
  2. Re-enter the correct SSID and password to proceed.
  3. Until then, the device will try to connect to its previously successfully connected network.